Home | Faqs

Faqs

Nissan Navara sporting the New Bakflip VP

Nissan Navara sporting the New Bakflip VP

Got a question?
No worries!

Have a look through the below and see if you cant find the answer – and if you cant then either call us on our freecall number for throw us an email via the contact us page

← Faqs

Operation

Our cover comes with a Tamper Proof Latching system that latches each panel securely on both sides of the truck! There are NO visible locks or keyholes or latches as the cover latches and secures from underneath the cover! This makes the BAKFlip Tonneau Cover one of the most secure tonneau cover on the market. When the cover is closed, and the tailgate is locked, you now have a secure trunk! 

Please click here if this helped you.
0 people found this helpful.


Simply open the tailgate, and from either the driver’s side or the passenger side, gently pull the spring loaded latch release and the latch will release for that panel. Fold the panel forward and repeat with the next panel, and the next panel…until all panels are unlatched and folded up towards the cab of the truck.

Please click here if this helped you.
0 people found this helpful.


Absolutely! The locking arms will hold the cover in place up against the back of your cab, and you can safely travel with it in this position. An added benefit is that the cover protects the back of your truck and glass from the cargo in your bed that you are carrying! 

Please click here if this helped you.
2 people found this helpful.


Absolutely! This was designed to work best when pulling 5th Wheel Trailers as many of our customers pull them. When you don’t have your 5th wheel connected, your truck bed is as secure as a trunk with easy access to all areas of your truck bed. However, when you want to hook up the fifth wheel, you simply fold the cover up all the way up and against the rear cab (window) of the truck. Hook up your 5th wheel or Gooseneck trailer and you are ready to go! Once you get where you are going and disconnect the trailer, unfold the cover and return to the fully closed position and you have a secure trunk again.

Please click here if this helped you.
0 people found this helpful.


With the New BAKFlip Cover, you can now secure your cover in the “partially open” position! We have installed “D Rings” on the top front edge of the cover (on both the passenger and driver’s side), so with bungee cords (that you provide), you are able to secure the cover in a partially open position and travel with it this way! (NOTE: There are pictures and details of this on the “Installation” page of this website. Once at this page, simply scroll down and you will see the pictures demonstrating this feature!).

Please click here if this helped you.
0 people found this helpful.


Absolutely not! As each panel securely and snugly latches to the bed, there is no rattling or noise at all associated with this cover! 

Please click here if this helped you.
0 people found this helpful.


Unfortunatley not. Each cover is designed to fit a full and open truck bed perfectly.

Please click here if this helped you.
0 people found this helpful.


Yes – As long as the toolbox is a minimum of 3.8 cm below the side rails, the cover will fit perfectly.

Please click here if this helped you.
0 people found this helpful.


← Faqs